PRODUCT DATA SHEET · Inch Machine Screw
Inch Machine Screw — Flat Countersunk Head
A2 (STS304Cu) · Pickled
Inch Machine Screw
Custom SpecificationAvailable
Length AdjustmentAvailable
MOQ applies · Enquire
Representative item: SFMASB047-0127
| Manufacturing Basis | JK Standard (ref. ASME B18.6.3) |
|---|---|
| Head Type | Flat Countersunk Head |
| Drive Type | Cross Recessed (Phillips) |
| Recess No. | No.2 |
| Material | A2 (STS304Cu) |
| Finish | Pickled |
| Size Range | 3/16-24산 ~ 3/16-24산 |
| Items Listed | 5 |
3D and 2D data based on actual production parts for every item. In-house inspection per lot; test certificates (material, product inspection, tensile, hardness, etc.) available.
Standard Industrial Stock Item — JK Standard refers to the in-house manufacturing standard of Jungkum Fastener Industrial Co., Ltd. This item is produced and controlled under that standard, which references the relevant public standards. Applications requiring full KS-standard compliance (e.g. defense, nuclear power) are handled on a dedicated production line — please contact us.
Dimensions Unit: mm — from production drawings
| Nominal Diameter | Head Dia. D | Head Height H |
|---|---|---|
| 3/16-24산 | 9 | 2.55 |
※ Representative dimensions; tolerances are per the drawing. Detailed tolerances are provided with a quotation or drawing request.
Size Matrix Nominal diameter × length (inch) — click a cell to open that item
※ Values in this document are for reference only and are not guaranteed. Verification under actual service conditions is recommended.
※ This series is manufactured and controlled under our in-house standards, which reference the relevant public standards. Applications requiring full KS-standard compliance (e.g. defense, nuclear power) are handled on a dedicated line.
※ Sizes not listed can also be discussed — call +82-32-821-4910
JUNGKUM FASTENER INDUSTRIAL CO., LTD. · 37 Eunbong-ro, Namdong-gu, Incheon, Korea · www.jungkum.com · Printed
