SEMS Screw
Cross Recessed (Phillips) Hex Head SEMS (Spring + Plain Washer) M10×15
C6BACB100-0150
| Product Group | SEMS Screw |
|---|---|
| Manufacturing Basis | JK Standard (in-house) |
| Head Type | Hex Head |
| Hex Head Forming | Offset |
| Drive Type | Cross Recessed (Phillips) |
| Recess No. | No.3 |
| Thread Type | SEMS (Spring + Plain Washer) |
| Spring Washer O.D. | 17 mm |
| Spring Washer Thickness | 2.6 mm |
| Plain Washer O.D. | 21 mm |
| Plain Washer Thickness | 2 mm |
| Nominal Diameter | M10 |
| Pitch | 1.5 mm |
| Width A/F s | 17 mm |
| Head Height H | 7 mm |
| Length | 15 mm |
| Material | Carbon Steel (SWCH10A) |
| Heat Treatment | Not Applicable |
| Finish | Yellow Zinc Plated |
This geometry data is based on actual production parts. Test certificates are issued only for lots shipped directly by us.
Standard Industrial Stock Item — JK Standard refers to the in-house manufacturing standard of Jungkum Fastener Industrial Co., Ltd. This item is produced and controlled under that standard, which references the relevant public standards. Applications requiring full KS-standard compliance (e.g. defense, nuclear power) are handled on a dedicated production line — please contact us.