Inch Tapping Screw
Combination (Phillips/Slotted) Round Head Inch Tapping Screw 5/32-16산×5/8"
CG1EWB039-0158
| Product Group | Inch Tapping Screw |
|---|---|
| Manufacturing Basis | JK Standard (ref. ASME B18.6.4) |
| Head Type | Round Head |
| Drive Type | Combination (Phillips/Slotted) |
| Recess No. | No.2 |
| Thread Type | Tapping Screw Type A |
| Nominal Diameter | 5/32-16산 |
| Head Dia. D | 7.9 mm |
| Head Height H | 2.8 mm |
| Length | 5/8" (15.8 mm) |
| Material | Carbon Steel (SWCH10A) |
| Heat Treatment | Case Hardened |
| Finish | White Zinc Plated |
This geometry data is based on actual production parts. Test certificates are issued only for lots shipped directly by us.
Standard Industrial Stock Item — JK Standard refers to the in-house manufacturing standard of Jungkum Fastener Industrial Co., Ltd. This item is produced and controlled under that standard, which references the relevant public standards. Applications requiring full KS-standard compliance (e.g. defense, nuclear power) are handled on a dedicated production line — please contact us.