Hex Head Bolt
Hex Flange Head Hex Head Bolt M8×12
CIMACB080-0120
| Product Group | Hex Head Bolt |
|---|---|
| Manufacturing Basis | JK Standard (ref. KS B 1002) |
| Head Type | Hex Flange Head |
| Thread Type | Machine Screw |
| Nominal Diameter | M8 |
| Pitch | 1.25 mm |
| Width A/F s | 12 mm |
| Flange Dia. (max) | 17.5 mm |
| Head Height H | 8 mm |
| Length | 12 mm |
| Material | Carbon Steel (SWCH10A) |
| Heat Treatment | Not Applicable |
| Finish | Yellow Zinc Plated |
This geometry data is based on actual production parts. Test certificates are issued only for lots shipped directly by us.
Standard Industrial Stock Item — JK Standard refers to the in-house manufacturing standard of Jungkum Fastener Industrial Co., Ltd. This item is produced and controlled under that standard, which references the relevant public standards. Applications requiring full KS-standard compliance (e.g. defense, nuclear power) are handled on a dedicated production line — please contact us.