Precision Instrument Screw
Cross Recessed (Phillips) Precision Instrument Precision Instrument Screw M2×5
CJ5AKA020-0050
| Product Group | Precision Instrument Screw |
|---|---|
| Manufacturing Basis | JK Standard (in-house) |
| Head Type | Precision Instrument |
| Drive Type | Cross Recessed (Phillips) |
| Recess No. | No.0 |
| Thread Type | Precision Instrument — Tapping (T/S) |
| Nominal Diameter | M2 |
| Head Dia. D | 3 mm |
| Head Height H | 0.6 mm |
| Length | 5 mm |
| Material | Carbon Steel (SWCH18A) |
| Heat Treatment | Case Hardened |
| Finish | Trivalent Black Chromate |
This geometry data is based on actual production parts. Test certificates are issued only for lots shipped directly by us.
Standard Industrial Stock Item — JK Standard refers to the in-house manufacturing standard of Jungkum Fastener Industrial Co., Ltd. This item is produced and controlled under that standard, which references the relevant public standards. Applications requiring full KS-standard compliance (e.g. defense, nuclear power) are handled on a dedicated production line — please contact us.