SEMS Screw
Cross Recessed (Phillips) Pan Head SEMS (Spring Washer) M6×16
CPAACB060-0160
| Product Group | SEMS Screw |
|---|---|
| Manufacturing Basis | JK Standard (in-house) |
| Head Type | Pan Head |
| Drive Type | Cross Recessed (Phillips) |
| Recess No. | No.3 |
| Thread Type | SEMS (Spring Washer) |
| Spring Washer O.D. | 11 mm |
| Spring Washer Thickness | 1.6 mm |
| Nominal Diameter | M6 |
| Pitch | 1 mm |
| Head Dia. D | 10.5 mm |
| Head Height H | 3.9 mm |
| Length | 16 mm |
| Material | Carbon Steel (SWCH10A) |
| Heat Treatment | Not Applicable |
| Finish | Yellow Zinc Plated |
This geometry data is based on actual production parts. Test certificates are issued only for lots shipped directly by us.
Standard Industrial Stock Item — JK Standard refers to the in-house manufacturing standard of Jungkum Fastener Industrial Co., Ltd. This item is produced and controlled under that standard, which references the relevant public standards. Applications requiring full KS-standard compliance (e.g. defense, nuclear power) are handled on a dedicated production line — please contact us.