Cross Recessed Tapping Screw
Cross Recessed (Phillips) Pan Head Thread Rolling Screw M4×6
CPTANA040-0060B
| Product Group | Cross Recessed Tapping Screw |
|---|---|
| Manufacturing Basis | JK Standard (ref. KS B 1032) |
| Head Type | Pan Head |
| Drive Type | Cross Recessed (Phillips) |
| Recess No. | No.2 |
| Thread Type | Tap-Tite B (Thread Rolling) |
| Nominal Diameter | M4 |
| Head Dia. D | 7 mm |
| Head Height H | 2.6 mm |
| Length | 6 mm |
| Material | Carbon Steel (SWCH10A) |
| Heat Treatment | Case Hardened |
| Finish | Nickel Plated |
This geometry data is based on actual production parts. Test certificates are issued only for lots shipped directly by us.
Standard Industrial Stock Item — JK Standard refers to the in-house manufacturing standard of Jungkum Fastener Industrial Co., Ltd. This item is produced and controlled under that standard, which references the relevant public standards. Applications requiring full KS-standard compliance (e.g. defense, nuclear power) are handled on a dedicated production line — please contact us.