SEMS Screw
Cross Recessed (Phillips) Hex Head SEMS (Spring + Plain Washer) M8×20
S6BASB080-0200T
| Product Group | SEMS Screw |
|---|---|
| Manufacturing Basis | JK Standard (in-house) |
| Head Type | Hex Head |
| Hex Head Forming | Trimmed |
| Drive Type | Cross Recessed (Phillips) |
| Recess No. | No.3 |
| Thread Type | SEMS (Spring + Plain Washer) |
| Spring Washer O.D. | 14 mm |
| Spring Washer Thickness | 2.1 mm |
| Plain Washer O.D. | 16 mm |
| Plain Washer Thickness | 1.5 mm |
| Nominal Diameter | M8 |
| Pitch | 1.25 mm |
| Width A/F s | 13 mm |
| Head Height H | 5.5 mm |
| Length | 20 mm |
| Material | A2 (STS304Cu) |
| Property Class | A2-50 |
| Heat Treatment | Not Applicable |
| Finish | Pickled |
Catalog stock items are A2-50. If you need a higher grade, A2-70, A2-80, A4-70 and A4-80 are available made to order.
request a quote
This geometry data is based on actual production parts. Test certificates are issued only for lots shipped directly by us.
Standard Industrial Stock Item — JK Standard refers to the in-house manufacturing standard of Jungkum Fastener Industrial Co., Ltd. This item is produced and controlled under that standard, which references the relevant public standards. Applications requiring full KS-standard compliance (e.g. defense, nuclear power) are handled on a dedicated production line — please contact us.