Inch Machine Screw
Cross Recessed (Phillips) Small Flat Countersunk Head Machine Screw 3/16-24산×1/2"
SEMASB047-0127
| Product Group | Inch Machine Screw |
|---|---|
| Manufacturing Basis | JK Standard (ref. ASME B18.6.3) |
| Head Type | Small Flat Countersunk Head |
| Drive Type | Cross Recessed (Phillips) |
| Recess No. | No.2 |
| Thread Type | Machine Screw |
| Nominal Diameter | 3/16-24산 |
| Head Dia. D | 7 mm |
| Head Height H | 1.5 mm |
| Length | 1/2" (12.7 mm) |
| Material | A2 (STS304Cu) |
| Heat Treatment | Not Heat Treated |
| Finish | Pickled |
This geometry data is based on actual production parts. Test certificates are issued only for lots shipped directly by us.
Standard Industrial Stock Item — JK Standard refers to the in-house manufacturing standard of Jungkum Fastener Industrial Co., Ltd. This item is produced and controlled under that standard, which references the relevant public standards. Applications requiring full KS-standard compliance (e.g. defense, nuclear power) are handled on a dedicated production line — please contact us.