Cross Recessed Machine Screw
Cross Recessed (Phillips) Flat Countersunk Head Machine Screw M3×5
SFMASB030-0050
| Product Group | Cross Recessed Machine Screw |
|---|---|
| Manufacturing Basis | JK Standard (ref. KS B 1023) |
| Head Type | Flat Countersunk Head |
| Drive Type | Cross Recessed (Phillips) |
| Recess No. | No.2 |
| Thread Type | Machine Screw |
| Nominal Diameter | M3 |
| Pitch | 0.5 mm |
| Head Dia. D | 6 mm |
| Head Height H | 1.75 mm |
| Length | 5 mm |
| Material | A2 (STS304Cu) |
| Property Class | A2-50 |
| Heat Treatment | Not Applicable |
| Finish | Pickled |
Catalog stock items are A2-50. If you need a higher grade, A2-70, A2-80, A4-70 and A4-80 are available made to order.
request a quote
This geometry data is based on actual production parts. Test certificates are issued only for lots shipped directly by us.
Standard Industrial Stock Item — JK Standard refers to the in-house manufacturing standard of Jungkum Fastener Industrial Co., Ltd. This item is produced and controlled under that standard, which references the relevant public standards. Applications requiring full KS-standard compliance (e.g. defense, nuclear power) are handled on a dedicated production line — please contact us.